Technically ends right before September.

Yeah ok fair, for “one and done” projects I do indeed believe that LLMs can be a useful tool. For maintainable code instead of write-once code, which is what I am 99% working with, I believe they suck. So my definition of “good” would be a lot stricter.

So, Claude was given the explanation on its training data. Not hugely surprising.

Honest question. If you claim you are not good enough to build it, how can you evaluate that what you are getting is good or not?

Ok, makes sense then. Live and drink, friend.

It’s a great game and all, but… is it just me or is it a bit harder than would be expected? I would consider myself to be pretty decent at the genre, but I will usually die a stupid death on something not previously encountered while exploring, and since it takes a while to reach that stage again, I’ll usually put it aside for a while and do something else.

Is it just me?

Well you can highlight text to search for, instead of typing, but still I wouldn’t really recommend it for the deck I guess. Maybe with the trackpads simulating a mouse, but I haven’t tried it to see how it feels. I played it on a pc proper.

+1 for Dredmor.

If you liked Obra Dinn, I really like The Roottrees are Dead which was very similar but kind of different.

Must have been hilarious.

Yes A1 mini. I’ll try this. Come to think of it, once or twice I had a warning that the nozzle could have filemant stuck or the build blade being crooked (neither seemed to be the case) but it could potentially be related if the bed probing is not working correctly.

Not sure if such a thing would manifest only on this particular filament die to some tolerance or whatever, but won’t hurt to try anyway.

I have read that the Bambu filaments do not guarantee with same thickness very well compared to other manufacturers (0.03mm instead of 0.02mm tolerance) and this could play a factor with small nozzles. I had in mind to try other manufacturers, but they are not so easily available for similar price in my area, so I have postponed it until I finish my current project, but I am keeping it in mind.

I should probably buy some calipers and actually measure it.

I would guess the z-offset should be fine because for any other filament it works correctly.

I will try to print a test for determining the flow rate for this specific filament after my print is done. I am using the default Bambu settings at the moment, and didn’t have any issue on other filaments so far, but I guess it’s worth checking out.

The satellite computers don’t perform as much work, produce as much heat, or are as densely placed as those in the data centers.

I know of one shitty ticketmaster-like site that I may unfortunately have to use like once a year.

Quality control

I’d just like Kate to have plugins for formatting Json and xml. Been a while, but last time I tried I couldn’t find any. It was by far my favourite editor back then, but didn’t continue after I changed jobs and needed windows.

A long time ago I had made a custom formatter for Kate via python, but I barely have any energy left to roll something in my own nowadays…

That goes great with a Claw deck.

On the other hand, it is very unlikely that I would willingly enter either China or US, so there is that.

I’ll try the calibration cube you mention with the specific filament at high and low speed versus another filemant and try to compare the results…